logo


The Cafe Windshield/LIP Combo is for riders that want the sport bike look. It is 7" shorter ( 5" vertically ) than our  ST1100 Combo below, it does not offer the complete wind protection but it looks great.

Honda ST1100

Café Combo

All Years

$180 Plus Shipping


ST131 - Café Combo Clear Shield / Clear LIP


ST126 - Café Combo Smoke Shield / Smoke LIP

The Laminar ST1100 windshield is about the same height as the stock Honda windshield. The original screws are used for mounting. The LIP is shipped unattached to the windshield so that you can attach it at the height you select. 3M Dual lock(tm) is included. The height adjustment range is up to three inches taller than original.

Honda ST1100

Laminar Windshield / LIP Combo

All Years

$204 Plus Shipping


ST116 - Laminar Combo Clear Shield / Clear LIP


ST111 - Laminar Combo Smoke Shield / Smoke LIP


The Shield or LIP can also be ordered seperately. Please call us to order. +1.714.540.8006

Also fits early ST1100 "Cat Eye" stock shields

Honda ST1100

All Years

$84 Plus Shipping


H2126C - Clear  LIP


H2126S - Smoke  LIP

LIPs for Honda ST1100 for National Cycle, order H2126. For Cee Bailey and Rifle, call us 1.714.540.8006 to special order. For Clearview Shield on ST1100 Please call California Sport Touring (888)799-5445 to order.

Honda ST1100

EARs

All Years

$65 Plus Shipping


EA118 EARs

The Laminar EARs simply tape to the fairing using 3M VHB automotive tape and extend the wind protection out to the weights at the ends of stock handlebars. They are molded of .060 inch thick black ABS and though they come unpainted they may be painted.

 

When it gets cold and/or wet just tuck your toes into the pockets formed by our Laminar FEET. You will be amazed at the difference they make.

Honda ST1100

FEET

All Years

$65 Plus Shipping


FT131 FEET

The Laminar FEET tape onto the fairing lower (pebble finish) with 3M™ VHB tape and then require one screw per side also. The upper part of each FOOT has a 3/4 inch 3M™ Dual Lock circle to attach it to the painted side of the fairing. By removing the lower fairing screws and separating the Dual Locks the fairing lower may be removed for engine servicing. The FEET stay attached to the lower fairing. When servicing is completed reinstall the lower fairing and press the Dual Locks together. The FEET are molded of black ABS and may be painted.