How some riders have attached the kwiKover to their motorcycles.
Please test these modifications before cutting anything. We have attempted to make the most convenient motorcycle cover possible but we cannot be responsible for loss or damage caused by inadequate installations.
There are nine pockets available in the flap to hold the plastic tube. For the sake of convention, they will be numbered one through nine starting with one being the first pocket sewn to the bag and nine at the end of the flap.
BMW:
Ducati:
- ST3/ST4a- See Instructions-[method 1]. Remove and set aside the 1" nylon strap from the kwiKover. Install the tube into the ??? pocket (see above), cut off the flap through the center of ??? pocket then insert the remaining flap between the seat and rear cowl with the tube/pocket just below the rear lip of the seat. Install and lock the seat. Tug on the kwiKover to assure a secure attachment.
Honda:
-
RC51- See Instructions- [method 2]
-
ST1100- See Instructions-[method 1]. Remove and set aside the 1" nylon strap from the kwiKover. Install the tube into the 4th pocket (see above), cut off the flap through the center of the 5th pocket then insert the remaining flap between the seat and rear cowl with the tube/pocket just below the rear lip of the seat. Install and lock the seat. Tug on the kwiKover to assure a secure attachment.
-
ST1300- See Instructions-[method 1]. Remove and set aside the 1" nylon strap from the kwiKover. Install the tube into the 3rd pocket (see above), insert the remaining flap between the seat and rear cowl with the tube/picket just below the rear lip of the seat. Install and lock the seat trapping the tube. Tug on the kwiKover to assure a secure attachement.
-
GL1800- See Instructions-[method 1]. Remove and set aside the 1" nylon strap from the kwiKover. Install the tube into the ??? pocket (see above), cut off the flap through the center of ??? pocket then insert the remaining flap between the seat and rear cowl with the tube/pocket just below the rear lip of the seat. Install and lock the seat. Tug on the kwiKover to assure a secure attachment.
Kawasaki:
Yamaha:
-
FJR1300- See Instructions-[method 1]. Remove and set aside the 1" nylon strap from the kwiKover. Install the tube into the ??? pocket (see above), cut off the flap through the center of ??? pocket then insert the remaining flap between the seat and rear cowl with the tube/pocket just below the rear lip of the seat. Install and lock the seat. Tug on the kwiKover to assure a secure attachment.
-
FZ1- See Instructions-[method 1]. Remove and set aside the 1" nylon strap from the kwiKover. Remove tube. Cut two small holes (in an "X" pattern) for the two small seat posts to fit through, make the cuts on the fourth tube pocket counting from the Kwikover as shown here:
You can cut away excess tube pockets forward of the two seat posts.